For more than 39 years, Allied has offered customers superior quality products for metallographic sample preparation and analysis, experienced technical assistance, and warm, friendly service. Our measure of success has always been your complete satisfaction.

ALLIED HIGH TECH PRODUCTS

TECHCUT 20-1000

DUALPREP 1

Manual Polishers. The TwinPrep 5x™ grinding/polishing machine is designed for manual sample preparation. The powerful, quiet motor drives both platens simultaneously and provides constant high-torque output throughout the speed range, in either 10-500 or 20-1,000 RPM configurations. The 7" color LCD touchscreen with keypad entry is used to control all functions, with an intuitive interface optimized for efficiency. Five (5) user-defined presets allow quick and easy RPM selections, in either clockwise or counterclockwise rotation. 

TWINPREP 5X

PRECISION MILLING/POLISHING SYSTEM. The X-Prep® is a specialized 5-axis CNC-based milling/grinding/polishing machine designed to support electrical and physical failure analysis techniques and other applications requiring high precision sample preparation.

X-PREP

Manual Polishers. 
The M-Prep 5x™ grinding/polishing machine is designed for manual sample preparation. The powerful, quiet motor provides constant high-torque output throughout the speed range, in either 10-500 or 20-1,000 RPM configurations. The 7" color LCD touchscreen with keypad entry is used to control all functions with an intuitive interface optimized for efficiency. Five (5) user-defined preset buttons allow quick and easy RPM selections in either clockwise or counterclockwise rotation. 

M-PREP 5X

PRECISION GRINDER/POLISHER. Manual Polishers. 
The MetPrep 1x™ precision grinding/polishing machine is excellent for manual preparation for standard applications, or when polishing delicate samples using handheld tools with lapping films that require extremely low RPM and consistent low-end torque. The 7" color LCD touchscreen with keypad entry is used to control all functions with an intuitive interface optimized for efficiency. Five (5) user-defined preset buttons allow quick and easy RPM selections from 5-350 RPM in either clockwise or counterclockwise rotation. The timer function allows either count-up or countdown operation.

METPREP 1X

E-PREP 4

Manual Polishers. The NEW M-Prep 6x™ grinding/polishing machine is designed for manual sample preparation. The powerful, quiet motor provides constant high-torque output throughout the speed range, in either 10-500 or 20-1,000 RPM configurations. Touchpad controls activate coolant flow (adjustable) and start/stop. A 7" color LCD touchscreen with keypad entry is used to control all functions with an intuitive interface optimized for efficiency. Five (5) user-defined preset buttons allow quick and easy RPM selections in either clockwise or counterclockwise rotation.

M-PREP 6X

DUALPREP 3

Semi-Automatic Grinders/Polishers. Programmable up to 25 grinding/polishing steps, including parameters for force mode, platen speed, comp/contra rotation (sample holder/platen), cycle time, fluid selection, sample force (LbF or N), sample rotation speed, water rinse and force reduction (on/off, %).

METPREP 4

PRECISION POLISHING. The MultiPrep™ System is a programmable machine that enables precise semiautomatic sample preparation of a wide range of materials for microscopic (optical, SEM, FIB, TEM, AFM, etc.) evaluation. 

MULTIPREP 8"

Specialty Grinders/Polishers. The OptiPrep™ System is designed for production polishing of a wide variety of optical components including Ferrules, Connectors, Waveguides, Silicon V-groove, Optical Chips, Capillary/Glass Lenses, Fiber Bundles, Ribbon Fiber and Bare Fiber.

OPTIPREP

The MetPrep 3™ grinding and polishing machines, with the PH™ line of power heads, are powerful systems for semiautomatic operation, ideal for low to high volume sample preparation requirements. A wide variety of combinations provides ideal solutions that accommodate any lab, application, or material.

METPREP 3

Precision Polishers. The MultiPrep™ System enables precise semiautomatic sample preparation of a wide range of materials for microscopic (optical, SEM, FIB, TEM, AFM, etc.) evaluation. Capabilities include parallel polishing, angle polishing, site-specific polishing, or any combination thereof. It provides reproducible results by eliminating inconsistencies between users, regardless of their skill. The 12" MultiPrep™ System has a scaled positioning device and higher torque rotation/oscillation motors for preparation of larger or multiple samples exceeding an area of 1,600 mm².

ALLIED HIGH TECH PRODUCTS

개요

활성 등재물

총 제품 수

서비스

상위 제품

TECHCUT 20-1000

DUALPREP 1

TWINPREP 5X

X-PREP

Moov에 등재하고 즉시 완벽한 구매자를 찾으십시오.

모든 제품

모든 등재물 보기