Cohu acquires Delta Design, supplier of test handling solutions.

Delta’s Summit series of pick-and-place thermal handlers are designed to meet the requirements of manufacturers of microprocessors, graphic processors and other high speed, high power integrated circuits. The Summit handlers incorporate Delta’s proprietary thermal control technology. The Summit PTC, or Passive Thermal Control, and ATC, or Active Thermal Control, models dissipate the heat generated during test enabling the integrated circuit to be tested successfully at its maximum speed and performance.

COHU / DELTA DESIGN

SUMMIT PTC

Delta’s VTS300, is an automated burn-in system that is capable of processing numerous low power circuits simultaneously. The VTS300 supports asynchronous loading and unloading of devices without system interruption to transform the burn-in process from a traditional batch-oriented process to a more efficient continuous-flow process.

VTS300

Delta 9000 Series Temperature Chambers offer a wide choice of temperature ranges and capacities in addition to smart electronics. Field proven by satisfied customers for over four decades, Delta chambers are quality instruments that provide service longevity and integrity unique in their field. Over the years, Cohu has added advanced features to the proven basic chamber design and has refined system components and programming capability to deliver outstanding quality and value.

DELTA 9039

the Delta 40xx series handler is specifically designed to run carrier mounted devices from 3/4" up to 4". These original Delta Design handlers are very well suited for either production lots of carrier mounted devices or engineering lots for custom packages that can be mounted in a carrier. Both handlers also feature 30 minute change over time, vertically mounted contactors, and plunge style contactors that can be retrofitted for plunge to board applications. Single site, Tri-temperature (-60°C to +160° ± 1°C), Carrier mounted devices 3" up to 4" (PGA, QFP, Flat Pack, LCC, PLCC, Hybrid + Custom), UPH ~750, Single sleeve input, 5 sleeve output featuring closed loop positive binning.

DELTA 4010

Delta’s Orion system is a test-on-strip handler. In pick-and-place and gravity-feed handlers, ICs are processed in single packages, after they are excised from leadframes or laminate substrates. In test-on-strip, ICs are tested on the leadframe or substrate and are separated in a subsequent operation. Test-on-strip may provide advantages in some applications, such as when testing very small ICs and when testing multiple ICs simultaneously (parallel testing).

ORION

DE8000

LX 7500

NITROFLEX 1810

EDGE DE8000

Configurable OSAT Friendly Pick-and-Place Handler

ECLIPSE XT

TURBOFLEX 1240

NITROFLEX 1840

TURBOFLEX 1210

NITROFLEX 1820

The Delta Pyramid is our next generation thermal handler providing high throughput / high parallel test capabilities for microprocessors and graphics processors. The system is highly configurable and is capable of adapting to various customer requirements ranging from small netbook microprocessor testing up to high-end server product testing.

PYRAMID

DELTA 9059

One of Delta Design’s original offerings, the Delta 40xx series handler is specifically designed to run carrier mounted devices from 3/4" up to 4". These original Delta Design handlers are very well suited for either production lots of carrier mounted devices or engineering lots for custom packages that can be mounted in a carrier. Both handlers also feature 30 minute change over time, vertically mounted contactors, and plunge style contactors that can be retrofitted for plunge to board applications. Single site, Tri-temperature (-60°C to +160° ± 1°C), Carrier mounted devices 3" up to 4" (PGA, QFP, Flat Pack, LCC, PLCC, Hybrid + Custom), UPH ~750, Single sleeve input, 5 sleeve output featuring closed loop positive binning.

DELTA 4015

Monitoring of temperature excursions between two present limits is provided by the Temperature Monitor. If limits are exceeded, power to the monitored unit is removed, a warning lamp is illuminated and an audible alarm is activated. When temperature is again within limits, the monitor may be reset for continued operation. A combination pyrometer scale provides reading at a glance with both Fahrenheit and Centigrade ranges.

DELTA 9911

The Delta Flex™, available in three models with various levels of automation, provides hot/cold test capability and broad versatility in IC package and media (tray or tube) handling. Through Delta’s continuous product improvement process, the handler has been successfully adapted to meet the evolving needs of IC manufacturers.

DELTAFLEX 1010

RTC 1500 C

SUMMIT SHP

Environmental Test Chambers, Test Volume 2.2 cubic feet (62.3 liters), Internal Dimensions 12”H x 20”W x 16”D (30.48 x 50.80 x 40.64 cm), Temperature Range –73°C to +315°C or –100°F to +600°F

DELTA 9064

DELTA 9028

DELTAFLEX 1020

DELTA 9023

Delta 1888 handler for RF/Wireless handling applications. The 1888 is a gravity-feed handler designed specifically for handling RF/Wireless ICs. High frequency devices require special handling to ensure the maximum yield is obtained from the test cell. The 1888 has been designed to create the optimum RF testing environment.

DELTA 1888

DELTA 9076

DELTAFLEX 1040

The Delta Design Burn-In System utilizes a versatile circuit board approach which allows the mounting of any combination of device sockets. An internal load rack design accommodates a density of greater than one device per cubic inch of chamber space (for 14-pin DIP devices), mounted in a useable space of 7” x 10” per board. The environmental chamber provides flexible rear wall seals which allow the circuit board connectors of the device under test to be outside the high temperature environment.

DELTA 9145

Delta’s Castle handlers incorporate a patented vertical tray handling system that provides high input/output automation in an extremely small footprint. The system is available in both memory and logic configurations. Castle Mx32 provides parallel testing of up to thirty-two devices. Castle Lx offers the same small footprint as the Mx32. Castle EC is interface compatible with the existing Castle Lx system and permits the addition of external process modules, such as input loading, extended sort categories, laser mark, etc.

CASTLE EC

TURBOFLEX 1220

2300CT

CASTLE Mx32

Delta Design Summit ATC is a pick-and-place thermal handler specifically designed for manufacturers of microprocessors, graphic processors, and other high-speed, high-power integrated circuits. The Summit series incorporates Delta's proprietary thermal control technology to effectively dissipate the heat generated during testing, enabling the integrated circuits to be tested at their maximum speed and performance. The ATC (Active Thermal Control) and PTC (Passive Thermal Control) models offer efficient heat management, ensuring successful testing under demanding conditions. 

SUMMIT ATC

The Delta MATRiX is a high performance pick-and-place handler that provides increased productivity in several dimensions of performance: up to three times higher throughput, four times higher parallelism, and active thermal control per test site. With an adjustable test site configuration, customers can reuse existing load-boards, including boards made for gravity handlers. The system also provides flexibility with field upgradeable options including a chamberless tri-temperature test site and auto contactor cleaning.

MATRiX

Delta’s Castle handlers incorporate a patented vertical tray handling system that provides high input/output automation in an extremely small footprint. The system is available in both memory and logic configurations. Castle Mx32 provides parallel testing of up to thirty-two devices. Castle Lx offers the same small footprint as the Mx32. Castle EC is interface compatible with the existing Castle Lx system and permits the addition of external process modules, such as input loading, extended sort categories, laser mark, etc. Delta’s Castle Lx is a hot and cold pick-and-place handler and it is capable of thermally conditioning devices from -60C to +160C. The Lx can position from one to nine devices for testing. Its large thermal soak area provides a steady flow of thermally conditioned devices to the test site allowing the handler to process parts at high speed when running at temperature. The Castle contains an innovative vertical tray storage system which saves space on the test floor by minimizing the handler’s footprint.

CASTLE Lx

The Delta Castle is a pick-and-place test handler capable of thermally conditioning devices from -60 degrees Celsius to +160 degrees Celsius. The Castle can position from one to nine devices for testing. Its large thermal soak chamber provides a continuous flow of thermally conditioned devices to the test site allowing the handler to process parts at high speed when running at temperature. The Castle incorporates an innovative vertical tray storage system that saves space on the test floor by minimizing the handler’s footprint.

CASTLE

The Delta EDGE is a pick-and-place handler that combines an economical design with a small footprint and fast index time (processing speed of the contactor placement mechanism). The EDGE handler is designed to meet the needs of integrated circuit manufacturers and subcontractors who test at ambient and hot temperatures.

EDGE

MATRiX II

The Model 1688 is a compact pick-and-place handler with the rapid contactor indexing of the RFS™. It offers reliable high-speed performance, making it a cost-efficient choice for tests, especially when environmental adaptability isn't necessary, like in some wireless chip tests.

1688

2300D

The Model 2040, or RFS, is a fast-index time, pick-and-place handler, designed for high volume production applications. This handler’s large thermal storage capacity enables an uninterrupted flow of thermally conditioned devices to the test site. The RFS utilizes a patented contactor indexing mechanism to achieve an index time of approximately 500 milliseconds.

RFS (2040)

Delta Eclipse is our next generation pick-and-place platform tailored for Fabless and Outsourced Semiconductor Assembly and Test (OSAT) customers, as well as integrated device manufacturers (IDMs). This is a highly configurable platform capable of handling general purpose integrated circuits to advanced computing and mobile processors that require Cohu’s T-Core active thermal control during test.

COHU / DELTA DESIGN

개요

활성 등재물

총 제품 수

서비스

상위 제품

SUMMIT PTC

VTS300

DELTA 9039

DELTA 4010

Moov에 등재하고 즉시 완벽한 구매자를 찾으십시오.

모든 제품

모든 등재물 보기