PERKIN ELMER

ELAN DTC II ICP

AAnalyst 300

Lambda 25

The PerkinElmer TMA 4000 is a uniquely designed thermomechanical analyzer (TMA) designed for optimal performance in measuring the coefficient of thermal expansion (CTE) in materials.

TMA 4000

RANDEX 3400

NexION 300x

The DSC 4000 is a reliable, single-furnace heat flux Differential Scanning Calorimeter (DSC) designed for routine applications. It features an easy-to-load vertical furnace, notable for its resistance to oxygen and chemical corrosion, ensuring consistent performance and quality results.

DSC 4000

3110

Ideal for laboratories testing semiconductors and fine chemicals, the NexION 2000S ICP-Mass Spectrometer features:

- A dedicated SMARTintro™ High Purity sample-introduction module minimizes contamination and delivers low background equivalent concentrations (BECs)
- Built-in cold plasma capabilities which, combined with Reaction mode, deliver PPQ detection limits
- Three quadrupoles, three gas channels, and three modes of operation combine to offer better interference removal, delivering better detection limits/improved data accuracy
- The industry’s fastest data acquisition speed on the market (100,000 points/sec) to handle any particle size
- A new solid-state RF generator with revolutionary LumiCoil™ technology – first ICP-MS RF coil that requires no maintenance or cooling
- Triple Cone Interface with Quadrupole Ion Deflector, delivering no maintenance beyond the cones
- Small footprint to minimize bench space
- Syngistix™ software provides an intuitive interface that mirrors your workflow, with left-to-right, icon-based navigation that guides you through your analysis. 

Plus, it’s a cross-platform solution, easing the transition from technique to technique.

NexION 2000S

The PinAAcle 500 is a robust, fully-integrated, flame-only benchtop system, ideal for laboratories needing a reliable, easy-to-use, yet high-performance flame AA. It is equipped with an innovative touchscreen interface with the flexibility to operate via its easy-to-use Syngistix Touch™ software or the more comprehensive, optional Syngistix™ for AA Software.

The PinAAcle 500 is designed for:
Exceptional sensitivity and precision, allowing analysis of lower concentrations with the accuracy of higher-end AA systems
Fast, simple, reproducible operation through the intuitive, icon-based interface of Syngistix Touch or Syngistix for AA
Harsh environments and samples thanks to its corrosion-resistant sample introduction components
Minimum maintenance and maximum speed with a rugged design that virtually eliminates maintenance, reducing operating costs

PinAAcle 500

Optima 7000 DV

DSC 8000

Clarus 580 GC

TR 2900

The Avio® 550 Max is a high-efficiency, compact ICP-OES instrument designed for laboratories with demanding throughput needs. Featuring a vertical plasma, it excels in analyzing high-matrix samples without the need for dilution, ensuring enhanced productivity and performance.

Avio 550 Max

The PerkinElmer Optima™ 8000 ICP-OES instrument is used to determine the concentration of Ca, Mg, Fe, Al, Ni, Ba, Mn, Sr and Pb in purified brines in the Chlor-alkali industry.

Optima 8000


The Avio® 500 is a compact ICP-OES featuring simultaneous, dual view capabilities and a vertical plasma design. It excels in processing high-matrix samples without dilution, ensuring high productivity and performance. Key benefits include exceptional matrix tolerance, minimal argon consumption (at least 50% less than other systems), simultaneous background correction for quick and accurate data, and high throughput due to its dual view technology. 

Avio 500

LS-55

LAMBDA 850

PHI 40-700

4410B

4480

Clarus 680 GC

OPTIMA 7100 DV

DMA 8000

TL-9000

ELAN 9000

Clarus 500

With its new high performance features, our robust Clarus® 590 GC offers improved sensitivity, reduced carryover and is easy to use and maintain. Designed with the same innovative features of the Clarus 690 GC, you have the most versatile sample handling options to choose from. Our comprehensive, industry-leading TurboMatrix™ solutions include options for headspace (HS), manual and automated thermal desorption (TD, ATD) and a flexible MultiPrep Autosampler for liquid sampling and SPME.

Clarus 590 GC

AAnalyst 400

OPTIMA 2000 DV

thermogravimetric analyzer gives you complete control over your sample environment and delivers high throughput and reliability, even unattended. Plus, advanced hyphenation technology works beautifully with FT-IR, MS, GC/MS, and other systems for better understanding of evolved gases.

TGA 8000

The TGA 4000 Thermogravimetric Analyzer is designed with a compact ceramic furnace, which provides the temperature control you need for accurate results. Its rugged design is also corrosion resistant for the applications flexibility you need today and tomorrow.

TGA 4000

TurboMatrix HS 40

AAnalyst 600

AAnalyst 700

The PerkinElmer Avio® 200 is a compact, hybrid-scanning ICP system designed for efficient handling of high-matrix samples without dilution. It combines superior performance with ease-of-use, featuring unique hardware and intuitive software for both multi-element and single-element analyses. Key highlights include the lowest argon consumption among ICPs, the fastest startup time, exceptional sensitivity and resolution for various elements, and an extended linear range through dual viewing technology. This system offers reliable data and cost-effective operation, making it an ideal choice for diverse ICP-OES applications.

Avio 200

1760-X

The PerkinElmer Clarus® 600 Mass Spectrometer (MS) is a detector that is interfaced to the
Clarus 600 Gas Chromatograph (GC). The entire system is controlled through the PerkinElmer
TurboMass™ GC/MS software.
Electron ionization (EI) and chemical ionization (CI) with 255 L/sec turbomolecular pump

Clarus 600 C MS 

ELAN 9000 DRC

8880

The PerkinElmer Clarus® 600 Mass Spectrometer (MS) is a detector that is interfaced to the
Clarus 600 Gas Chromatograph (GC). The entire system is controlled through the PerkinElmer
TurboMass™ GC/MS software.
Electron ionization with 255 L/sec turbomolecular pump.

Clarus 600 T MS

The PerkinElmer Clarus® 600 Mass Spectrometer (MS) is a detector that is interfaced to the
Clarus 600 Gas Chromatograph (GC). The entire system is controlled through the PerkinElmer
TurboMass™ GC/MS software.
Electron ionization with air-cooled oil diffusion pump.

Clarus 600 D MS 

4410 DC

2400-SSA

The Clarus 590 and 690 systems' all-new wide-range flame ionization detector (FID) measures hydrocarbon compounds at very low and very high levels, with a linear response range of 107. That allows you to accurately quantitate the largest and smallest peaks on a chromatogram without changes to range or attenuation. 

Clarus 690

AAnalyst 100

PinAAcle 900Z

2400 AL

ELAN 6100 DRC

PerkinElmer's Avio® 220 Max ICP-OES gains its outstanding analytical performance from its novel optical system, including a unique double monochromator, dual backside-illuminated charge-coupled device (DBI-CCD) detector, real-time dynamic wavelength stabilization for plug and play (cold start to sample analysis in 10 minutes), in line attenuation by wavelength, and automatic dual viewing of the plasma torch. It’s the combination of these innovative components that provides the Avio 220 Max ICP-OES with: 
• Excellent spectral resolution 
• High analytical flexibility 
• Lowest argon consumption 
• Expanded linear dynamic range 
• Reduced spectral interferences 
• Maximum light throughput 
• Exceptional analytical speed

Avio 220 Max

 Elemental Analyzer (2400 Series II) is a proven instrument for the rapid determination of the carbon, hydrogen, nitrogen, sulfur or oxygen content in organic and other types of materials. It has the capability of handling a wide variety of sample types in the field of pharmaceuticals, polymers, chemicals, environmental and energy, including solids, liquids, volatile and viscous samples.

2400 II

OPTIMA 7300 V

 high performance liquid chromatography (HPLC)

SERIES 200

The PerkinElme Clarus® 600 Mass Spectrometer (MS) is a detector that is interfaced to the
Clarus 600 Gas Chromatograph (GC). The entire system is controlled through the PerkinElmer
TurboMass™ GC/MS software.
Electron ionization with 75 L/sec turbomolecular pump.

Clarus 600 S MS

The Perkin-Elmer LAMBDA 950 is a high-performance spectrophotometer that has long been considered the industry standard. It uses a gridless PMT with a Peltier-controlled PbS detector to achieve high-performance testing across the spectral range up to 3300 nm. The UV/Vis resolution of the LAMBDA 950 reaches 0.05 nm, while the NIR resolution reaches up to 0.20 nm. The LAMBDA 950 also features industry-leading components and accessories for sample control and flexibility, including large, dual sample compartments, a Universal Reflectance Accessory, snap-in integrating spheres, and a General-Purpose Optical Bench.

LAMBDA 950

AutoIMAGE FT-IR

The NexION® 1000 ICP-MS is a cost-effective, high-throughput mass spectrometer designed for routine, multi-elemental trace-level analysis compliant with regulatory standards. It incorporates unique technologies to offer remarkable speed and ease of operation, significantly enhancing laboratory efficiency.

NexION 1000

Spectrum Two is the FT-IR spectrometer of choice for everyone, everywhere. With fully integrated, robust universal sampling for trouble-free measurements and portability options, Spectrum Two is ideal for use in both laboratory and remote testing environments. Ideally suited to everyday analysis, you can confidently perform fast, accurate IR analysis and assure the quality of your materials across a wide range of applications.

SPECTRUM TWO

2410 Series II

Lambda 3B

LAMBDA 35

advanced high performance flow scintillation analyzer for the qualitative and quantitative monitoring of single and dual labeled radioisotopic samples. It features a high resolution color graphics monitor for real time chromatogram display of radio and UV channels, plus detector status and run conditions.

Radiomatic 625TR

8800

Optima 3000 

AS-93 Plus

The Perkin-Elmer 4400 Series is a fast cycle, water-cooled load locked system that uses circular or delta style cathodes. It has the advantage of eliminating the need to vent the process chamber for loading and unloading substrates, reducing pump down time, contamination, and target burn-in. This increases material utilization. The system is a general-purpose sputtering system with up to four 8 inch diameter circular cathodes that can use DC Magnetron, RF Magnetron, or RF Diode configurations. These can be sputtered sequentially without breaking vacuum. Power sources are available up to 2 kW RF and 5 kW DC.

4400

The ELAN DRC II combines the power of patented Dynamic Reaction Cell (DRC) technology, performance-enhancing Axial Field Technology (AFT) and a high-performance sample introduction system with the ability to run any reaction gas. The result is the ultimate analytical tool, providing uncompromised sensitivity and performance in all matrices for the world’s most difficult applications. Unlike collisioncell, high-resolution or cool-plasma systems, the ELAN DRC II completely eliminates polyatomic interferences, minimizing background equivalent concentrations, while maintaining analyte sensitivity, providing ultratrace-level detection limits in virtually any sample.

ELAN DRC II

The Perkin-Elmer 4450 is a type of sputtering system that belongs to the Perkin-Elmer 4400 Series. It is similar to the Model 4410, but has additional features such as load lock pumping and substrate heating. The system can operate automatically and has three Delta™ cathode positions, one of which can be replaced with an in-process heater fixture. The Perkin-Elmer 4450 Sputter Deposition System is designed to be flexible and offers a variety of operating and process modes. 

4450

SPECTRUM ONE

2400

SPECTRUM 100

Optima 8300

The PerkinElmer Frontier™ range of near-,mid- and far-IR Fourier Transform spectrometers

FRONTIER 

Perkin–Elmer Physical Electronics Model 6300 secondary ion mass spectrometer (SIMS)

6300 SIMS

NexION 300S

AAnalyst 800

AAnalyst 200

LAMBDA 20

2400-8L

OPTIMA 7300DV

NexION 350

The Perkin-Elmer Model 2400-8SA features a large 211/2” rotating, water cooled annular table with a capacity of sixty-four 2″, thirty 3″, or thirteen 4″ wafers.

Used in conjunction with a cathode shaping aperture, the rotating table permits high uniformity. A 4″ wafer vertical range of the table facilitates coating bulk substrates. As an added feature, up to three 8″ round cathodes may be specified allowing sequential deposition from several targets or alternately, static deposition or heating from any target position.



2400-8SA

LAMBDA 2

NexION 350X ICP-MS lets you minimize analysis times without compromising your desired level of interference removal or detection limits. The instrument’s Universal Cell Technology also enhances laboratory productivity. Dual-channel Universal Cell (2 gas lines) 

NexION 350X

PLASMA 40

The DRC-e brings the interference eliminating power of patented Dynamic Reaction Cell™ (DRC™) technology and performance-enhancing Axial Field™ Technology (AFT) to the industry-proven ELAN ICP-MS system. The result is uncompromised sensitivity and performance in a robust system designed for routine laboratories. The ELAN DRC-e uses chemical resolution to eliminate plasma-based polyatomic species before they reach the quadrupole mass spectrometer. This ion-molecule chemistry uses a reaction gas to “chemically scrub” polyatomic or isobaric species from the ion beam before they enter the analyzer, resulting in improved detection limits for traditionally difficult elements, including As, Cr, Fe, Se and others. And, unlike collision-cell, high-resolution or cool-plasma systems, the ELAN DRC-e system eliminates not only the primary interference; but also prevents the formation of new interferences, while maintaining analyte sensitivity – providing ultratrace level detection limits in virtually any matrix. 

ELAN DRC-e

LAMBDA 1050

Time of flight mass spectrometer (TOF MS)

AxION 2 

NexION 350D

INTRACOOLER 2P

OPTIMA 5300 DV

SPECTRUM 1000

ELAN 6000 ICP

The QSight LC/MS/MS System provides the capability and confidence required to analyze the most complex food and environmental samples. With high level of sensitivity and throughput, laboratories can meet even the most stringent regulatory requirements rapidly, easily, and effectively

Sensitivity for the most demanding regulations
Easy-to-use with ready to implement methods
Patented flow-based technology that enables up to 15% more productivity
StayClean™ Source, self-cleaning design for maximum sensitivity and exceptional uptime
Laminar Flow Ion Guide™ for highly efficient field-free transmission, providing virtually no maintenance requirements
Dual Source technology gives you the capability to set ESI or APCI modes, with two independent probes for true multiplexing
Modular Simplicity™ 3Q Software to acquire, quantify, and report with flexible data viewing options and powerful remote diagnostics.
Different models available (QSight 110 LC/MS/MS, QSight 210 LC/MS/MS, QSight 220 LC/MS/MS, QSight 420 LC/MS/MS) addressing different levels of performance and efficiency required by different labs’ analysis needs.


QSight 420 LC/MS/MS

The PerkinElmer Diamond Thermogravimetric/Differential Thermal Analysis (TG/DTA) system combines the flexibility of DTA with the proven capabilities of the TG measurement technology, providing property information for a variety of samples in the temperature range from ambient to 1500C. The simultaneous TG/DTA system can be used for such applications as oxidation, heat resistance, the amount of water, compositional analysis and the measurement of ash content in a sample. This system is also used to cover such needs as reaction rate and accelerated degrading tests.

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

PERKIN ELMER

개요

활성 등재물

총 제품 수

서비스

상위 제품

ELAN DTC II ICP

AAnalyst 300

Lambda 25

TMA 4000

Moov에 등재하고 즉시 완벽한 구매자를 찾으십시오.

모든 제품

모든 등재물 보기