The Tegal 903e is an inline RIE/plasma production etcher configured for six-inch wafers. It is a single-wafer, cassette-to-cassette driven tool with easy-to-use menu control and a 13.56 MHz RF Generator. The input gases are controlled by MFC, with up to 4 MFCs in the system. This tool implements multi-step etch recipes using multiple process gases and has been optimized for specific etches of specific films. Gases available in this configuration are N2, O2, SF6, CHF3, and He.

The Tegal 903e plasma dry etch equipment is used by the semiconductor industry for integrated circuit fabrication. It is an industry standard in single-wafer dry etch of silicon nitride, polysilicon, amorphous silicon, and silicon oxide. Wafers are transported to a reaction chamber utilizing a non-friction spatula wafer transport mechanism. A gas mixture is introduced into the Reaction Chamber and becomes reactive by the application of radio frequency (RF) electromagnetic radiation. The reactive mixture, or plasma, etches away material that is not covered by the masking photoresist. The etch process is terminated by time (a parameter specified in the recipe), the wafer is unloaded from the reaction chamber, and a new wafer is introduced repeating the cycle until all wafers have been processed.

TEGAL

903E

The Tegal 901e is an inline RIE/plasma production etcher for six-inch wafers. It is a single-wafer, cassette-to-cassette driven tool with easy-to-use menu control and a 13.56 MHz RF Generator. The input gases are controlled by MFC, with up to 4 MFCs in the system. This tool implements multi-step etch recipes using multiple process gases and has been optimized for specific etches of specific films. Gases available in this configuration are N2, O2, SF6, CHF3, and CF4.

The Tegal 901e plasma etcher is used by the semiconductor industry for integrated circuit fabrication. It is an industry standard in single-wafer dry etch of silicon nitride, polysilicon, amorphous silicon, and silicon oxide. Wafers are transported to a reaction chamber utilizing a non-friction spatula wafer transport mechanism. A gas mixture is introduced into the Reaction Chamber and becomes reactive by the application of radio frequency (RF) electromagnetic radiation. The reactive mixture, or plasma, etches away material that is not covered by the masking photoresist. The etch process is terminated at an appropriate time, the wafer is unloaded from the reaction chamber, and a new wafer is introduced repeating the cycle until all wafers have been processed.

901E

900E

-980ACS series etch system. Customers will use the system for high-volume fabrication of storage devices destined for mainstream consumer and industrial applications.
-Order included a new tool and two ACS upgrades to existing 980 production tools and it is part of an overall plan to add production capacity and enhance factory automation support while maintaining compatibility with existing production processes.
-Latest in a series of plasma etch systems produced by Tegal.

980ACS

901i ACS

901g ACS

701-03

901B

1611

905E

6500

HRe- etch system, low-pressure, high-density plasma source, magnetic confinement.

TEGAL

개요

활성 등재물

총 제품 수

서비스

상위 TEGAL Dry / Plasma Etch

903E

903

901E

901

Moov에 등재하고 즉시 완벽한 구매자를 찾으십시오.

모든 TEGAL Dry / Plasma Etch