TEKTRONIX

MSO44

9374L

MDO4034

Instrument Carts/Workstation

-Stable/Mobile Platform
-Tiltable Shelf for Optimum Viewing
-Workbench Height
-Heavy-duty Nylon Instrument Straps
-Surge and Noise Suppression
-Surge-protected Four Outlet Power Strip Accessory

K420

TDS684A

1751A

DPO-3014

7904

P7313SMA

AM5030

DTG5334

DSA8300

TDS540B

AFG3021C

TDS6154C

WFM5200

2225

7854

1765

371A

11801A 

The TDS224 is a 100 MHz, 4 channel digital oscilloscope from Tektronix. Measure voltage or current signals over time in an electronic circuit or component to display amplitude, frequency and rise times, etc. Applications include troubleshooting, production test, and design.

TDS 224

TLA714

MDO3054

SM 11

DPO73304DX

80A07 

TDS430A

WFM5000

TDS380

1755A

2230

BSA286CL

IPA 310

CR286A

577D1

TDSUSBF

2645BCT

AFG3102C

11402A

TPS2024B

TDS 3032 

TDS5054B

TDS6604

Analog Bandwidth 23 GHz
Analog Sample Rate – 2/4 Channels 100 GS/s / 50 GS/s
Standard Memory – Analog + Digital  62 MS	
Analog Channels 4	

MSO72304DX

DPO3032

 AFG3022C

Remote Electrical Sampling Module w/ TDR, Dual Ch., 60 GHz

80E09B

11801B

465 MSO2014B

2430A

2431L 

TDS 3034C

1745A

MDO34 3-BW-350                          

Real Time Spectrum Analyzer, 9 kHz to 20 GHz

RSA6120A

The WFM 90 can be used in traditional in-house applications of television production, post-production, and signal transmission. The portability of this instrument allows it to be used in non-traditional applications such as field production and system maintenance.

WFM90

The TEKTRONIX 2215A Oscilloscope is a rugged, light-weight, dual-channel, 60-MHz instrument that features a bright, sharply defined trace on an 80- by 100-mm cathode-ray tube (crt). Its vertical system provides calibrated deflection factors from 2 ml per division to 5 V per division. Trigger circuits enable stable triggering over the full bandwidth of the vertical system. The horizontal system provides calibrated sweep speeds from 0.5 s per division to 50 ns per division along with delayed-sweep features. A X10 magnifier circuit extends the maximum sweep speed to 5 ns per division when the A and B SEC/DIV switch is set to 0.05 us per division.

2215A

DPO70604B

TDS5054

TLA612

TDS 310

TAS 475

The Tektronix TDS2014 is a four-channel, 100 MHz, 1 GS/s digital scope with a color LCD screen. An optional rear-mounted TDS2MEM Communication Module provides a CompactFlash card slot, GPIB, RS-232, and Centronics-type parallel printer interfaces.

TDS 2014

TDS754D

TDS5104B

2235

DPO7254C

1750A

The 2601B-PULSE’s control loop system eliminates the need to manually tune for load changes up to 3 μH, ensuring your pulse has no overshoot and ringing when outputting pulses from 10 μs up to 500 μs at any current level up to 10 amps. With pulse rise times < 1.7 μs, you can properly characterize your device or circuit under test.

-Output 10 A @ 10 V with a 10 μs pulse width
-Pulse rise time <1.7 μs to characterize with confidence
-High fidelity pulse output without tuning at any current level

2601B-PULSE

TDS6604B

TDS7104

TDS 1012

TDS754C

VM6000

TDS 784A

MSO4104

The Tektronix 576 is a versatile curve-tracing system that excels in high-current testing applications. It can display curves for a wide range of semiconductors, including bipolar transistors, field-effect transistors, silicon-controlled rectifiers, triacs, diacs, diodes and rectifiers, zener diodes, and tunnel diodes. The system is capable of pulse collector operation up to 200 amps peak and has a voltage range of 15 V to 1500 V. The collector supply can provide up to 220 W peak and the step generator has adjustable current limiting. A display area readout of test results and setup parameters helps reduce the likelihood of operator error. 

P7633

DMM4050

TDS 320

2465B

2465A

MSO4054

DSA8200

MDO4034C

7704

Input Channels: 4
Analog Bandwidth (-3 dB) 5 mV/div - 1 V/div: 1 GHz
Calculated Rise Time 5 mV/div (typical): 350 ps
Hardware Bandwidth Limits: 20 MHz or 250 MHz
Input Coupling: AC, DC, GND
Input Impedance: 1 MΩ ±1%, 50 Ω ±1%
Input Sensitivity, 1 MΩ: 1 mV/div to 10 V/div
Input Sensitivity, 50 Ω: 1 mV/div to 1 V/div
Vertical Resolution: 8 bits (11 bits with Hi Res)
Max Input Voltage, 1 MΩ: 250 VRMS with peaks ≤ ±400 V
Max Input Voltage, 50 Ω: 5 VRMS with peaks ≤ ±20 V
DC Gain Accuracy: ±1.5% with offset set to 0 V

DPO4104

VM700T

The TDS2000 Series digitak storage oscilloscopes deliver an unbeatable combination of superior performance, unmatched ease-of-use and affordability in an ultra lightweight, portable package. 

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

TEKTRONIX

개요

활성 등재물

총 제품 수

서비스

상위 TEKTRONIX Electronic Test

AFG3102C

TDS 2014

2431L

2601B-PULSE

Moov에 등재하고 즉시 완벽한 구매자를 찾으십시오.

모든 TEKTRONIX Electronic Test