The Heller 1900W is a versatile oven with a high-capacity, 26-inch-wide tunnel, designed for unmatched flexibility in board handling. It can be fitted with either a single or dual-rail edge hold conveyor. The single-rail conveyor can carry large boards or multi-board panels up to 24 inches wide. Alternatively, the dual-rail conveyor, with independently adjustable sides, can convey boards as wide as ten inches each.

HELLER

1900W

1810SS

1705

1809EXL-MK3 NW

1706 EXLN

942C-H

Reflow Oven

The 1800 reflow oven models support high mix / high volume throughput… at speeds up to 32 inches (80 centimeters) per minute, while conserving valuable factory floor space. Rapid response times and precise temperature controls assure process uniformity, regardless of component density or board loading, with identical profile performance in either air or nitrogen.

1809 MK 5

988HAC

1800

1808 MK III

1089

1912 EXL-SL

The Heller 788 is a continuous cure, vertical format oven designed for assembly line integration. It conveys products on rails inside the oven in a continuous stream with cycle times as short as 25 seconds. It features four internal thermal zones with independent time and temperature controls, enabling a wide range of curing or encapsulant profiles, including two-step curing. Curing times can range from a few minutes to several hours, with a pass-through cycle also available. The oven is clean room compatible and maintains temperature uniformity in air or nitrogen atmospheres. It can handle product widths from two to 18 inches and thicknesses as thin as .015 inch. The Heller 788 offers conveyor width adjustability, carrier versatility, and a variety of shuttle mechanisms. Its continuous processing eliminates temperature fluctuations, ensuring consistent output.

1913EXLA

1088 HAC

932C

932C-H

1700

1500S

1500EXL

1700SX

1700S

The Heller 1800W is a versatile oven with a high-capacity, 26-inch-wide tunnel, providing unmatched flexibility in board handling. It can be equipped with an adjustable single or dual-rail edge hold conveyor, capable of carrying large boards or multi-board panels up to 24 inches wide.

1800W

1810 MK5

1707

1809 MKL-LED

1088 EXL

1809EXL-N2

1088/9

1500SX

1707MK5

1912EXL

1809UL

1811 MKIII

1809 MK III

1809EXL

1707EXL

1800EXL

1913 MK III

1707 MKIII

1705EXL

2043 MK5

1936MK5

1706 EXL

1808EXL

The Heller 1088 Total Forced Convection Surface Mount Reflow System is a world-class solder reflow system that offers a range of benefits and features. It is an 8 heating zone forced convection reflow system with 4 heaters above and below the conveyor, ensuring rapid and uniform heat transfer. The system boasts Extra High Volume® heating modules and fast reaction heating modules that respond to load variations in just 1/10 of a second. The system has a totally usable 18" (45cm) belt width and a heated tunnel length of 43.5" (111cm). It maintains a cross belt temperature variation of <+/- 3oC. The system is totally computer-controlled, with 3 thermocouple profiling for optimized temperature profiles.

1088

The Heller 1700W is a versatile oven with a 26-inch-wide tunnel that can handle large boards or multi-board panels up to 24 inches wide. It can be fitted with either a single-rail or dual-rail edge hold conveyor, each adjustable for different board sizes. The dual-rail system allows for two distinct temperature profiles to run simultaneously, supporting both reflow and short-term curing. This feature enables the processing of two production lines concurrently, accommodating any combination of board sizes and conveyor speeds, potentially eliminating the need for a second oven. An optional computer-controlled automatic adjustment of conveyor width is available for both conveyor types.

1700W

1800EXLA

The Heller 1500W is a versatile oven with a 26-inch-wide tunnel that can be fitted with either a single or dual-rail edge hold conveyor. The single-rail conveyor can carry large boards or multi-board panels up to 24 inches wide, while the dual-rail conveyor can independently adjust each side to convey boards as wide as ten inches. Both conveyor types offer computer-controlled automatic adjustment of width. Each rail’s speed is independently adjustable, allowing for two distinct temperature profiles to run simultaneously, supporting both reflow and short-term curing. This feature enables the concurrent conveyance of two production lines with any combination of board sizes and conveyor speeds, potentially eliminating the need for a second oven.

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

HELLER

개요

활성 등재물

총 제품 수

서비스

상위 제품

1900W

1810SS

1705

1809EXL-MK3 NW

Moov에 등재하고 즉시 완벽한 구매자를 찾으십시오.

모든 제품

모든 등재물 보기