설명

-Flying Probe Tester

환경 설정

Test Unit model PILOT V8 Next Series: Probes and Cameras 8-needle machine Probes Position - Test Side Front/Rear Number of Electrical Probes 4 （Top)+4（Bottom) Number of Openfix Probes 1(Top)+1(Bottom) Maximum Digital Embedded Channels 4 Number of CCD Colour Cameras 1(Top)+1(Bottom) Automatic Marker Recognition Yes Automatic UUT Planarity Compensation Yes Board clamping system, UUT size and work area (*) Board Clamping System Manual (Dual Action) Active Test Area 538 x 610 mm (21.18 X 24") Board Size 540 x 610 mm (21.25 X 24") Minimum Board Size (*) 20 x 20 mm (0.78 x 0.78") Maximum Board Thickness 5 mm(0.19”) Minimum Board Thickness 0.3 mm (0.00118") Maximum Component Height 37 mm (1.456") Board Loading Vertical UUT Fly Height Clearance 40 (mm) UUT Edge Clearance 2 mm *Universal carrier for unique board configurations. General requirements Power 220 V/50 Hz 12 A, 110 V/60 Hz 24 A Power Consumption 3.5 kW max Air Flow 0.35 CFM - 10l/min.  Weight 1350 kg (2976 Ibs)  Length 175 cm (68.9”)  Width 123 cm (48.4”)  Height 174 cm (68.50”)  Operating temperature: da 10°C a 25°C Relative humidity: 30÷80% (not condensed) Tests and Measurements (Instruments DSP) Voltage Generator 1 DC/AC (DRA) ±1 mV to ±10 V (±0.1%) Voltage Generator 2 DC/AC (DRB) ±1 mV to ±10 V (±0.1%) Voltage Generator 3 DC/AC (DRC) ±25 mV to ±100 V (±0.2%) Current Generator DC/AC ±1 nA to ±0.5 A (±0.1%) Waveform Generator 1 Sin, Tri, Arbitrary (DRA) 1 Hz to 3 MHz (±1 mHz ) - ±10 V max Waveform Generator 2 Sin, Tri, Arbitrary (DRC) 1 Hz to 10 KHz (±10 mHz ) - ±100 Vmax Voltage Measurements DC/AC ±200 μV to ±100 V Current Measurements DC/AC ±3 nA to ±0.5 A Frequency Measurement 0.1 Hz to 50 MHz Digital Embedded Channel ±12 V - 500 mA - 10 MHz Resistance Measurement 1 mΩ to 100 MΩ Capacitance Measurement 1 pF to 1 F Inductor Measurement 1 μH to 1 H Zener Measurement up to 100 V Software Operating system working under Windows Automatic program generation from CAD data (module CAD)