설명
Back-Grind환경 설정
- 200mm Wheel - Spindle: - Air Bearing - 1000 - 7000/min - 4.2kw - Chuck Table - Porus Chuck Table - Vacuum Chuck - Air Bearing - 0 - 300mm - 3ea - Cassette - 2 ea - Same Flow / Open Flow - 1200(W)x2670(D)x1800(H) - 3100 kg - AC200V±10% 3-phase 50/60Hz - 0.49~0.52MPa - Accuracy - 1.5um or less - Ra 0.13umOEM 모델 설명
The Disco DFG8540 is a fully automatic in-feed surface grinder. It has a conventional two-spindle, three-chuck design and is capable of performing both large diameter and thin-finish grinding. The processing position of the grinding wheel coincides with the chuck table for each spindle for improved grinding performance. The Disco DFG8540 supports workpiece sizes up to Φ8 inch and uses a Φ200 mm Diamond Wheel for grinding. The spindle has a rated output of 4.2 kW and a rotation speed range of 1,000 to 7,000 min-1. The equipment dimensions are 1,200 × 2,670 × 1,800 mm and it weighs approximately 3,100 kg.문서
문서 없음
유사 등재물
모두 보기
DISCO
DFG8540
카테고리
Wafer Grinding
마지막 검증일: 5일 전
주요 품목 세부 정보
조건:
Used
작동 상태:
Installed / Idle
제품 ID:
148175
웨이퍼 사이즈:
4"/100mm, 6"/150mm, 8"/200mm
빈티지:
알 수 없음
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
설명
Back-Grind환경 설정
- 200mm Wheel - Spindle: - Air Bearing - 1000 - 7000/min - 4.2kw - Chuck Table - Porus Chuck Table - Vacuum Chuck - Air Bearing - 0 - 300mm - 3ea - Cassette - 2 ea - Same Flow / Open Flow - 1200(W)x2670(D)x1800(H) - 3100 kg - AC200V±10% 3-phase 50/60Hz - 0.49~0.52MPa - Accuracy - 1.5um or less - Ra 0.13umOEM 모델 설명
The Disco DFG8540 is a fully automatic in-feed surface grinder. It has a conventional two-spindle, three-chuck design and is capable of performing both large diameter and thin-finish grinding. The processing position of the grinding wheel coincides with the chuck table for each spindle for improved grinding performance. The Disco DFG8540 supports workpiece sizes up to Φ8 inch and uses a Φ200 mm Diamond Wheel for grinding. The spindle has a rated output of 4.2 kW and a rotation speed range of 1,000 to 7,000 min-1. The equipment dimensions are 1,200 × 2,670 × 1,800 mm and it weighs approximately 3,100 kg.문서
문서 없음