
설명
i-line stepper환경 설정
Software: MSCV ver 2.42C OCSV ver 2.42 TOOL ver 2.51A OpenVMS VAX V6.1 Optics: Variable NA, max NA 0.63 Max field size: 22 x 22 SHRINC type 3 illuminator: conventional, 1/2 annular TTLFC2 focus check PPD Chip leveling Reticle: 6" reticle, 6" reticle case Fixed reticle microscope Reticle barcode reader Wafer handling: Notch wafers Ring-type wafer chuck Pre-alignment 2 (8", N) with 6-hammer Wafer loader type 3 Wafer carrier tables: left and right In-line ready (left side) Alignment: FIA LSA HP 5517C laser Facilities: NEMA box, 2 lines for CVCF Rack on right side Body-OP rack cable: 3M Chamber: Asahi S19 (1997) Chamber temperature: 23.0°COEM 모델 설명
"This i-line stepper from Nikon is one of our most popular lithography systems. Resolution ≦ 350 nm, exposure light source i-line (365 nm wavelength), reduction ratio 1:5, exposure field 22mm square to 17.9 (H) × 25.2 (V) mm (6-inch reticle), 20.0 × 20.4 mm (5-inch reticle), alignment accuracy (EGA, |M| + 3σ) ≦ 55 nm. The NIKON NSR 2205 i12D is a Steppers and Scanners system. The NSR 2205 i12D can be used with 8” wafer sizes.문서
문서 없음
카테고리
Steppers & Scanners
마지막 검증일: 3일 전
주요 품목 세부 정보
조건:
Used
작동 상태:
알 수 없음
제품 ID:
162944
웨이퍼 사이즈:
8"/200mm
빈티지:
알 수 없음
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
유사 등재물
모두 보기NIKON
NSR-2205i12D
카테고리
Steppers & Scanners
마지막 검증일: 3일 전
주요 품목 세부 정보
조건:
Used
작동 상태:
알 수 없음
제품 ID:
162944
웨이퍼 사이즈:
8"/200mm
빈티지:
알 수 없음
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
설명
i-line stepper환경 설정
Software: MSCV ver 2.42C OCSV ver 2.42 TOOL ver 2.51A OpenVMS VAX V6.1 Optics: Variable NA, max NA 0.63 Max field size: 22 x 22 SHRINC type 3 illuminator: conventional, 1/2 annular TTLFC2 focus check PPD Chip leveling Reticle: 6" reticle, 6" reticle case Fixed reticle microscope Reticle barcode reader Wafer handling: Notch wafers Ring-type wafer chuck Pre-alignment 2 (8", N) with 6-hammer Wafer loader type 3 Wafer carrier tables: left and right In-line ready (left side) Alignment: FIA LSA HP 5517C laser Facilities: NEMA box, 2 lines for CVCF Rack on right side Body-OP rack cable: 3M Chamber: Asahi S19 (1997) Chamber temperature: 23.0°COEM 모델 설명
"This i-line stepper from Nikon is one of our most popular lithography systems. Resolution ≦ 350 nm, exposure light source i-line (365 nm wavelength), reduction ratio 1:5, exposure field 22mm square to 17.9 (H) × 25.2 (V) mm (6-inch reticle), 20.0 × 20.4 mm (5-inch reticle), alignment accuracy (EGA, |M| + 3σ) ≦ 55 nm. The NIKON NSR 2205 i12D is a Steppers and Scanners system. The NSR 2205 i12D can be used with 8” wafer sizes.문서
문서 없음