ARNOLD is one of the worldwide leading manufacturers of burners, tools and machines as well as ready-to-use systems for customers in the area of photovoltaic, glass and quartz glass processing, fibre-optic and the automotive production.

ARNOLD GRUPPE

72/1500

With two parallelly arranged diamond precision cutting discs. Machine is suitable for squaring mono crystalline ingots with of work piece diameter of 150 - 230 mm (wafer format 125 x 125 mm or 156 x 156 mm). Segment lengths of 200 – 2500 mm can be processed. With water hydraulic guidance for thin diamond cutting discs as well as cutting force and automatic feed control.

72/476

This machine is suitable for cutting squared and as grown mono crystalline silicon work pieces with a length of 1.200 up to 3.000 mm. The Maximal diameter of ingot is 230 mm, the cut off  length is between 200 mm up to 1020mm.

72/454

Bandsaw for cutting from mono-crystalline Ingots up to a Ø 320 mm

BS4000/320 A

This machine is suitable for cutting squared multi  and mono crystalline silicon work pieces with a length of 50 up to 550 mm. The shortest cut off  length is 10 mm.

72/360

72/1540

The machine is suitable for grinding lateral surfaces and chamfering squared multi  crystalline silicon work pieces in the format 125 x 125 mm and 156 x 156 mm, with four parallelly arranged grinding aggregates (2x pre- and 2x fine grinding). Work piece lengths of 180 up to 550 mm can be processed.

72/865

This machine is suitable for grinding SiC ingots of 4 -12“ with a max. length of 600 mm and straight notch and Flat grinds. Centering of parts is done automatically.

RG612

RG608

The 72/855 is suitable for grinding of the lateral surfaces of squared mono- and multi  crystalline silicon work pieces in the format 125 x 125 mm and 156 x 156 mm, with four parallelly arranged grinding aggregates (2x pre- and 2x fine grinding). Work piece lengths of 180 up to 500 mm can be processed.

72/855

Combination grinding machine for mono blocks (round chamfer) and multi blocks (45 ° chamfer) and grinding of the surface. Designed for manual or automatic assembly via robots.

BG1000

The 72/860 is suitable for grinding of the lateral surfaces of squared mono- and multi crystalline silicon work pieces in the format 125 x 125 mm and 156 x 156 mm, with four parallelly arranged grinding aggregates (2x pre- and 2x fine grinding). Work piece lengths of 180 up to 1000 mm can be processed.

72/860

The machine is suitable for chamfering of squared mono- or multi  crystalline silicon work pieces in the format of 125 x 125 mm and 156 x 156 mm with two parallelly arranged grinding aggregates (2x combined pre- and fine grinding). Work piece lengths of 180 up to 1000 mm can be processed.

72/852

Automatic grinding of cone and groove for preparation of poly crystal rod for float zone processing. The machine is suitable for automatic grinding of cone and croove for preparation of poly crystal rod for flot zone processing. The work piece length of 500 up to 3000 mm with are maximal diameter from 200mm can be processed. The  grinding length is between 500 and 1000mm.

NC 559/200

This machine is suitable for chamfer and round grinding of squared mono-crystalline silicon work pieces in the format of 125 x 125 mm and 156 x 156 mm, with three grinding aggregates (2x pre-, 1x fine grinding) and one additional grinding aggregate for OD grinding. Work piece lengths of 180 up to 1000 mm can be processed.

ARNOLD GRUPPE

개요

활성 등재물

총 제품 수

서비스

상위 제품

72/1500

72/476

72/454

BS4000/320 A

Moov에 등재하고 즉시 완벽한 구매자를 찾으십시오.

모든 제품

모든 등재물 보기